Evolutions Post Sleeves by TimberTech fit or sleeve over a nominal 4x4 actually (3.5"x3.5"), use a Post Skirt to hide the bottom of post sleeve (not included) and were designed to allow the rail to run over-the-top of the post and sleeve. Evolutions Post Sleeve is used with Contemporary or Builder Rail and both require an additional top rail to run over the post and sleeve.
Post Sleeves available in 42-inch or 8-foot and in Classic Black or Traditional Walnut.
Feeney 1/8" Cable Release Tool
Cable Release Tool by Feeney removes 1/8" Cable from any Feeney Quick-Connect Fittings. Release Tool slides between the cable and the jaws of the QC fitting to easily adjust or remove the cable.
Feeney Cable Lacing Needle
Lacing Needles by Feeney help thread the cable through posts, and are incredibly useful when going through wood posts. Though it is recommended to add a lacing needle regardless of post type. Lacing Needles are available in a standard straight, or curved for adjacent post threading. Available for 1/8" Cable Wire.
Feeney 1/8" Cable Cutter
Feeney Cable Cutters are designed to easily and precisely cut 1/8" cable wire. Use to trim wires for build your own cable systems, or to trim excess from CableRail Kits.
Feeney Intermediate Picket
Intermediate Pickets by Feeney retain adequate spacing for 1/8" Horizontal Cable, Wire, and CableRail Kits. Pickets should be positioned between posts, attaching to the underside of the top rail, and the top side of the deck or bottom rail. Intermediate pickets include two brackets and for easy installation, and screws for wood or composite handrails. Available for Level or Stair application, Feeney Intermediate Pickets space cables at 3" on center, and allow for 1/8" Cable or Wire.
Stainless Steel Protector Sleeves keep 1/8" Cable from "rubbing" or "waring" on the post where a turn in the cable appears. Protector Sleeves require a 1/4" drilled hole to fit in and accept 1/8" Cable. Use with wood 4x4 or 6x6 posts when transitioning cable railing down a set of stairs, or making a level angle turn. Protector sleeves are sold 10 per bag.
Feeney 1/8" Reel of 1x19 Grade-316 Stainless Steel Cable
Reels of 1x19 woven stainless steel cable are available in 100 foot 250 foot and 500 feet lengths. Use 1/8" Cable with 1/8" Quick-Connect Fittings. Cable by Feeney can be "turned" up to two 90 degree angles, or a combination of angles resulting in 180 Degree change of angle or less.
Feeney Quick-Connect Surface Mount Tensioner #9913
Quick Connect Surface Mount Tensioner #9913 is a Swiveling Cable Receiver which attaches to the face of a wood or metal post (metal screws not included) use for 1/8" Cable and pair with Fixed-End Surface Mount 9903. Includeds 2 screws for mount installation.
Quick Connect Surface Mount #9903 is a non-tensioning fixed-end Cable Receiver which attaches to the face of a wood or metal post (metal screws not included) use for 1/8" Cable and pair with Tensioning Surface Mount 9913. Includeds 2 screws for mount installation.
Quick Connect Pivot #9915 is a 1/8" Compatible fixed end connector, using a lag for stair rail application. With a wide 180 degree pivoting range, the lag can be screwed into the post level. Then once the cable is connected an tightened, the angle of all connectors will be consistent. Includes 2" Lag for wood posts, and 2-1/2" Lag for Composite Sleeved Posts.
Quick Connect Pivot Tensioner #9916 is a 1/8" Compatible tension swiveling connector allowing for 3/4" in tensioning adjustment, using a lag for stair rail application. With a wide 180 degree pivoting range for stair application, the lag can be screwed into the post level. Then once the cable is connected an tightened, the angle of all connectors will be consistent along the stairs. Includes 2" Lag for wood posts, and 2-1/2" Lag for Composite Sleeved Posts.
Quick Connect Lag Tensioner is a swiveling type connector allowing for 3/4" in tensioning adjustment. Use 9910 Lag Tensioner for 1/8" cable, and to attach to face of a post/sleeve. Includes a 2" lag for wood, and a 2-1/2" lag for sleeved composite posts. For 1/8" Cable pair "Quick-Connect Lag 9905" with "Quick-Connect Lag Tensioner 9910"
Quick Connect Lag is a non-tensioning fixed-end Cable Receiver which screws to the face of a wood or composite post/sleeve with a 2" lag for wood, and a 2-1/2" lag for sleeved composite posts. For 1/8" Cable pair "Quick-Connect Lag 9905" with "Quick-Connect Lag Tensioner 9910"
Evolution Contemporary Rail Kit includes two Universal Rails, Hardware, Footblocks, and Screws. Available in 6 foot and 8 foot, Classic Black and Traditional Walnut. Kits do not include balusters. Evolutions Contemporary by TimberTech is a modern take on a "deck builder" style rail. Contemporary rail can be installed with regular 29" Aluminum Balusters, Feeney Cable, or even Glass Balusters.
Sleeves, Skirts, and Rail Top Cap sold separately.
Evolutions Installation Guide Above
Evolutions Contemporary with Balusters Installation Video Above
Evolutions Contemporary With Cable Railing Install Video Above
Set an Appointment
As Material Suppliers, we take the time to understand our customers needs and recommend products based on their specifications. From decking to railing to lighting, we have great options with freindly service.
Enter your email to set an appointment with one of our deck experts at our showroom in Gardner, KS.